Adhesive holder SYS3
Sale price
€3,89
Tax included
Shipping calculated at checkout
Benefits at a Glance
- Magnetic adhesive holder for smooth surfaces
- Bowl quickly removable and easy to clean
- Feeding place flexible on pane or back wall
Adhesive holder SYS3 (single part) – the matching Gecko dish/drinker holder for sticking onto a fixed feeding or watering spot in the terrarium. Ideal as a replacement holder or additional holder if you want multiple feeding or watering spots in your terrarium setup. Compatible with System 3 (SYS3) – suitable for our Bowl L and the drinker within SYS3. Modular, reusable, and manufactured in Germany (Made in Germany).
Important: The adhesive holder stays in place. You only change/rotate the dish or drinker (e.g., while other parts are being cleaned).
Why terrarium keepers use the adhesive holder:
– Fixed spot on glass or smooth surface: Food/water stays where it belongs
– More flexibility: additional feeding or watering spots in the terrarium without a complete rebuild
– SYS3-compatible: works with Bowl L & drinker within SYS3
– Modular & interchangeable: you quickly swap out the bowl/drinker, the holder stays
– Clean & controllable: less contact with substrate, areas easier to monitor
Typical applications (practical):
– Second or third feeding point in the terrarium for better distributed feeding
– Additional watering spot as a defined place in the terrarium setup
– Rearing, breeding, and quarantine terrarium setups with clear, controllable feeding/watering spots
– Everyday: Change bowl/drinker while others are being cleaned (holder remains stuck)
– Clean terrarium setup: Food/water away from the substrate, less mess, cleaner placement
Compatibility:
– System: SYS3
– Suitable for: Bowl L and drinker within SYS3
Color:
– Currently only available in black
Material & Durability:
– UV-resistant and heat-resistant
Scope of delivery:
– 1× Adhesive holder SYS3 (Ø 25 mm)
– 2× Adhesive dots
Note: This is the holder (without bowl/without drinker/without set).
Notes:
This product is manufactured using a 3D printing process. We always strive to ensure high quality, but small imperfections or irregularities may occur due to the printing process. These do not affect the functionality or stability of the product and do not constitute a defect. Each product is unique and reflects the influences of material and process.
For a complete feeding station, you can combine the bowl with mixed Gecko Nutrition, water, or suitable feeder insects. Further solutions for feeder insects can be found under Accessories for Insects.
Safety instructions
This product is an accessory for terraristics and is exclusively intended for use as a bowl, holder, or drinker in terrariums, breeding boxes, or similar housing environments.
Not a toy and not suitable for children. Keep out of reach of children. Depending on the variant, small parts, holders, adhesive parts, and strong magnets may be included.
Magnets: Magnetic variants may contain strong magnets. Magnets must not be swallowed or inhaled. If magnets are swallowed, severe internal injuries can occur. Seek immediate medical attention if ingestion is suspected.
Keep magnets away from children, pets outside of their intended housing, pacemakers, defibrillators, implanted medical devices, magnetic data carriers, bank cards, watches, mobile phones, and sensitive electronics. Persons with implanted medical devices should maintain a precautionary distance of at least 15 cm from the magnets.
Before each use, check that the bowl, holder, and fastening are securely seated. Branch holders should only be attached to sufficiently stable branches, bamboo sticks, or similar structures. Adhesive holders should only be applied to clean, dry, smooth, and suitable surfaces.
When using magnetic fastening, ensure that no fingers, skin, animal bodies, or sensitive objects are between the magnets. Magnets can quickly attract, pinch, or damage surfaces.
Depending on the variant, the product is made of 3D-printed plastic. Visible layer lines are inherent to the process. Do not continue to use if cracks, sharp edges, deformations, loose parts, or loose magnets are present.
Clean before first use and regularly thereafter. Clean only with water and, if necessary, a mild, pet-safe cleaning agent. Do not boil, do not microwave, do not clean in the dishwasher, and do not expose to direct heat permanently.
Manufacturer:
LucaTech3D GmbH
Eugen-Kübler-Straße 8
74538 Rosengarten
Germany
E-Mail: info@lucatech3d.com
What products is the SYS3 adhesive holder compatible with?
The SYS3 adhesive holder is designed for System 3 and is compatible with our Bowl L and the drinker within SYS3.
What is an additional adhesive holder useful for?
For multiple fixed feeding or watering spots in the terrarium or as a replacement holder. You leave the holder stuck and only change the bowl or drinker as needed.
How is the adhesive holder attached?
The holder is attached with adhesive dots to a suitable smooth surface. For good adhesion, the surface should be clean, dry, and as free of grease as possible.
Are a bowl or drinker included in the scope of delivery?
No. This is the holder as a single part. You can find suitable products as Bowl L or drinker within SYS3.
What color is the adhesive holder available in?
Currently, the SYS3 adhesive holder is only available in black.
Blog posts
BioFaunaCube©: The Ideal Insect Terrarium
BioFaunaCube©: The Ideal Spider Terrarium, Beetle Terrarium, and More – and an Absolute Eye-Catcher
Anyone intereste...
Read more
When the Terrarium Turns Into a Dollhouse: Why Kitschy Mini-Furniture, 3D Trees, Backdrops & More Can Harm Animals
Animals are living beings, not accessories. Yet, more and more products on the market resemble items meant for a dol...
Read more
Drosophila Breeding with the CritterLatch
CritterLatch 2.0 – Perfect for Rearing Drosophila hydei and melanogaster
CritterLatch 2.0 – Perfect for Rearing Dr...
Read more
