This page is currently being expanded. Safety information is gradually added.

All relevant safety information is already included with the product packaging and is available to you when you purchase the product.

Additional documents and legal information can be accessed via the links in the footer (e.g. “Safety information”, “Documents”).

Applies to

Clamp holder sets and clamp holder bundles, as well as glue holder sets and glue holder bundles for magnetic bowls & drinkers.

Material description

• Bowl and holder: food-grade polypropylene (PP)
• Magnets: embedded neodymium magnets sealed with 2-component, food-grade epoxy resin
• Included: four cable ties made of polyamide (PA) and two sheet-metal adhesive pads

General safety information

The set is designed exclusively for use in terrariums. Keep it out of reach of children to avoid swallowing of small parts or improper use.

Clean all parts thoroughly before first use.

Warnings concerning magnets

• Risk of pinching: Magnets can trap skin or fingers, especially when attaching to metal surfaces. Take care not to place fingers between magnet and metal.
• Electronic interference: Magnets may interfere with pacemakers, credit cards, mobile phones and other electronic devices. Keep the product away from such items.
• Risk of breakage: If the product is damaged, magnets may become exposed. They must not come into contact with animals or small children.

Installation notes

Assemble and mount the set strictly according to the enclosed instructions.

Cleaning and care

• Clean bowl and holder with warm water and a mild detergent.
• Avoid harsh cleaners or abrasive sponges to prevent damage to the material.

Disposal

• The product consists of recyclable materials and should be disposed of in accordance with local regulations.
• The sheet-metal adhesive pads must be disposed of separately, as they may rust and cause environmental pollution.

Flammability warning

The product is flammable. Keep it away from open flames and temperatures above 70 °C to avoid deformation or fire hazards.

When polypropylene (PP) and polyamide (PA) burn, potentially harmful fumes such as carbon monoxide (CO), carbon dioxide (CO₂) and nitrogen-containing compounds may be released. Avoid inhaling these fumes and ensure good ventilation in case of fire.

Recommended target group and use

The set is intended for terrarium animals such as geckos and other small reptiles. It should not be used for other animal species or outside terrarium applications.

Possible hazards

• Swallowing of small parts (e.g. cable ties, sheet-metal pads or magnets) by children or animals can pose serious health risks.
• Risk of pinching injuries when handling the magnets.
• Rust on the sheet-metal pads in contact with moisture can lead to sharp edges and injury.
• Incorrect installation or overloading can damage the set and create hazards.
• Exposure to temperatures above 70 °C can deform or damage the material.

Affected products (article codes)

• TL_S1SAXSBK
• TL_S1SAXSGR
• TL_S1SAXSBR
• TL_S1SASBK
• TL_S1SASGR
• TL_S1SASBR
• TL_S3SALBK
• TL_S3SALGR
• TL_S3SALBR

Material description

• Isopod bowls: polylactide (PLA)

General safety information

The bowls are designed specifically for use in terrariums and for isopods or other small animals. Keep them out of reach of children to avoid swallowing or improper handling.

Clean the product thoroughly before first use (see “Cleaning and care”).

Notes on use

• The bowls are suitable for use in humid environments.
• Avoid contact with aggressive chemicals or substances that may damage the material.

Cleaning and care

• Clean the bowls with warm water and a mild detergent.
• Do not use harsh chemicals or abrasive sponges to avoid damaging the material.

Flammability warning

The product contains combustible materials. Keep it away from open flames and high temperatures to prevent deformation or fire hazards.

When PLA burns, harmful gases such as carbon monoxide (CO) and carbon dioxide (CO₂) may be released. Ensure good ventilation and avoid inhaling fumes in case of fire.

Disposal

The isopod bowls are made from biodegradable PLA. Please dispose of the product in line with local rules for biodegradable plastics.

Recommended target group

The product is intended for isopods and other small animals. It should not be used for other applications or animal species.

Possible hazards

• Swallowing of individual bowls or parts of them by small children or animals can lead to serious health risks.
• Material damage from heat: the product should not be exposed to temperatures above 40 °C, as PLA becomes deformable at relatively low temperatures.

Affected products (article codes)

• TL_ANBK
• TL_ADNBK
• TL_ANXLBK

Material description

• Body of drinker: polylactide (PLA)
• Magnets: embedded neodymium magnets inside the body
• Bottle: PETG (polyethylene terephthalate, glycol-modified)
• Cotton pad: cotton

General safety information

The product is designed specifically for use with insects. Keep it out of reach of children to avoid swallowing or improper handling.

Clean the product thoroughly before first use (see “Cleaning and care”).

Warnings concerning magnets

• Risk of pinching: Magnets can trap skin or fingers, especially when attaching to metal surfaces. Take care not to place fingers between magnet and metal.
• Electronic interference: Magnets may affect pacemakers, credit cards, mobile phones and other electronic devices. Keep the product away from such items.
• Risk of breakage: If the product is damaged, magnets may become exposed. They must not come into contact with insects, other animals or small children.

Notes on use and assembly

Use and mount the drinker strictly in accordance with the enclosed instructions.

Cleaning and care

• Clean the drinker body and bottle with warm water and a mild detergent before first use and after each use.
• Replace the cotton pad regularly to maintain hygiene.
• Do not use aggressive chemicals or abrasive sponges to avoid damage to the material.

Disposal

• The PLA body is biodegradable but must still be disposed of in line with local regulations.
• The PETG bottle and cotton pad should be disposed of according to local rules.
• The magnets are embedded inside and cannot be removed easily; if the product is no longer usable, dispose of it as a complete unit.

Flammability warning

The product contains flammable materials. Keep it away from open flames and high temperatures to prevent deformation or fire hazards.

When PLA, PETG and the magnetic materials burn, harmful fumes such as carbon monoxide (CO) and carbon dioxide (CO₂) may be released. Ensure good ventilation and avoid inhaling fumes in case of fire.

Recommended target group

The product is intended for insects and their appropriate husbandry or care. It is not suitable for use with other animal species.

Possible hazards

• Swallowing of small parts such as magnets, caps or cotton pads by children or animals can pose serious health risks.
• Risk of pinching when handling the magnets.
• Material damage due to heat: the product should not be exposed to temperatures above 40 °C, as PLA becomes deformable at relatively low temperatures.

Affected products (article codes)

• TL_ITBKM
• TL_ITBK
• TL_ITBKXL