Material description

• Bowl and holder : Food-safe polypropylene (PP)
• Magnets : Cast neodymium magnets sealed with 2K food-safe epoxy resin
• Also included : Four cable ties made of polyamide (PA) and two sheet metal adhesive dots

General safety instructions

This product is only suitable for use in terrariums. It should be kept out of reach of children to prevent ingestion or improper handling.
Before first use, the set must be thoroughly cleaned

Warnings about magnets

The built-in magnets are strong and can be dangerous:

• Crush Hazard : Magnets can pinch skin or fingers, especially when attached to metal surfaces. Be careful not to trap fingers between the magnet and the metal.
• Electronic interference : Magnets can interfere with pacemakers, credit cards, cell phones, and other electronic devices. Keep the product away from such objects.
• Risk of breakage : If the product is damaged, the magnets may be released. Keep them out of reach of animals or small children.

Instructions for assembly

The set must be assembled according to the enclosed instructions.

Cleaning and care

• Clean the bowl and holder with warm water and a mild detergent.
• Aggressive cleaners or abrasive sponges should be avoided to avoid damaging the material.

Disposal

• The product is made of recyclable materials and should be disposed of in accordance with local regulations.
• The metal adhesive dots must be disposed of separately as they can rust and cause environmental pollution.

Flammability warning

The product is flammable. Keep away from open flames and temperatures above 70°C to avoid deformation or the risk of fire. Combustion of polypropylene (PP) and polyamide (PA) can release potentially harmful fumes such as carbon monoxide (CO), carbon dioxide (CO2), and nitrogen-containing compounds. Avoid inhaling these fumes and ensure adequate ventilation in the event of a fire.

Recommended target group

The set is suitable for terrarium animals such as geckos and other small reptiles. It should not be used for other animal species or for applications outside of terrariums.

Possible dangers

• Swallowing small parts : Small children or animals could swallow cable ties, metal adhesive dots or magnets, which could lead to serious health risks.
• Danger of crushing due to magnets : When handling the magnets there is a risk of injury if skin or fingers become trapped.
• Risk of rust : The sheet metal adhesive dots may rust when in contact with moisture and form sharp edges that could cause injuries.
• Improper use : Incorrect assembly or overloading can damage the set and cause danger.
• Material damage due to heat : The product should not be exposed to temperatures above 70°C to avoid deformation or damage.

Affected products

• TL_S1SAXSBK
• TL_S1SAXSGR
• TL_S1SAXSBR
• TL_S1SASBK
• TL_S1SASGR
• TL_S1SASBR
• TL_S3SALBK
• TL_S3SALGR
• TL_S3SALBR

Material description

• Bowl and holder : Food-safe polypropylene (PP)
• Magnets : Cast neodymium magnets sealed with 2K food-safe epoxy resin
• Also included : Four cable ties made of polyamide (PA) and two sheet metal adhesive dots

General safety instructions

This product is only suitable for use in terrariums. It should be kept out of reach of children to prevent ingestion or improper handling.
Before first use, the set must be thoroughly cleaned

Warnings about magnets

The built-in magnets are strong and can be dangerous:

• Crush Hazard : Magnets can pinch skin or fingers, especially when attached to metal surfaces. Be careful not to trap fingers between the magnet and the metal.
• Electronic interference : Magnets can interfere with pacemakers, credit cards, cell phones, and other electronic devices. Keep the product away from such objects.
• Risk of breakage : If the product is damaged, the magnets may be released. Keep them out of reach of animals or small children.

Instructions for assembly

The set must be assembled according to the enclosed instructions.

Cleaning and care

• Clean the bowl and holder with warm water and a mild detergent.
• Aggressive cleaners or abrasive sponges should be avoided to avoid damaging the material.

Disposal

• The product is made of recyclable materials and should be disposed of in accordance with local regulations.
• The metal adhesive dots must be disposed of separately as they can rust and cause environmental pollution.

Flammability warning

The product is flammable. Keep away from open flames and temperatures above 70°C to avoid deformation or the risk of fire. Combustion of polypropylene (PP) and polyamide (PA) can release potentially harmful fumes such as carbon monoxide (CO), carbon dioxide (CO2), and nitrogen-containing compounds. Avoid inhaling these fumes and ensure adequate ventilation in the event of a fire.

Recommended target group

The set is suitable for terrarium animals such as geckos and other small reptiles. It should not be used for other animal species or for applications outside of terrariums.

Possible dangers

• Swallowing small parts : Small children or animals could swallow cable ties, metal adhesive dots or magnets, which could lead to serious health risks.
• Danger of crushing due to magnets : When handling the magnets there is a risk of injury if skin or fingers become trapped.
• Risk of rust : The sheet metal adhesive dots may rust when in contact with moisture and form sharp edges that could cause injuries.
• Improper use : Incorrect assembly or overloading can damage the set and cause danger.
• Material damage due to heat : The product should not be exposed to temperatures above 70°C to avoid deformation or damage.

Affected products

• TL_S1SAXSBK
• TL_S1SAXSGR
• TL_S1SAXSBR
• TL_S1SASBK
• TL_S1SASGR
• TL_S1SASBR
• TL_S3SALBK
• TL_S3SALGR
• TL_S3SALBR

Safety instructions for the woodlouse bowls

Material description

• Woodlice bowls : Polylactide (PLA)

General safety instructions

The woodlouse bowls are specially designed for use in terrariums and for woodlouse or other small animals. They should be kept out of reach of children to prevent swallowing or improper handling.
Before first use, the product must be thoroughly cleaned (see section "Cleaning and Care").

Instructions for use

• The bowls are suitable for use in humid environments.
• Avoid using the bowls with harsh chemicals or substances that could damage the material.

Cleaning and care

• Clean the bowls with warm water and a mild detergent.
• Do not use harsh chemicals or abrasive sponges to avoid damaging the material.

Flammability warning

This product contains flammable materials. Keep away from open flames and high temperatures to avoid deformation or the risk of fire. Burning PLA can release harmful fumes such as carbon monoxide (CO) and carbon dioxide (CO2). In the event of a fire, ensure adequate ventilation and avoid inhaling these fumes.

Disposal

The woodlouse bowls are made of biodegradable PLA. Please dispose of the product according to local regulations for biodegradable plastics.

Recommended target group

This product is designed for woodlice and other small animals. It should not be used for other applications or animal species.

Possible dangers

• Swallowing small parts : Small children or animals could swallow the bowls, which could lead to serious health risks.
• Material damage due to heat : The product should not be exposed to temperatures above 40°C, as PLA becomes deformable even at low temperatures.

Affected products

• TL_ANBK
• TL_ADNBK
• TL_ANXLBK

Safety instructions for insect waterers

Material description

• Drinking body : polylactide (PLA)
• Magnets : Cast neodymium magnets inside
• Bottle : PETG (polyethylene terephthalate glycol modified)
• Cotton pad : cotton

General safety instructions

The product is specifically designed for use with insects. It should be kept out of reach of children to prevent ingestion or improper handling.
Before first use, the product must be thoroughly cleaned (see section "Cleaning and Care").

Warnings about magnets

The built-in magnets are strong and can be dangerous:

• Crush Hazard : Magnets can pinch skin or fingers, especially when attached to metal surfaces. Be careful not to pinch fingers between the magnet and the metal.
• Electronic interference : Magnets can interfere with pacemakers, credit cards, cell phones, and other electronic devices. Keep the product away from such objects.
• Risk of breakage : If the product is damaged, the magnets may be released. Keep them away from insects, animals, or small children.

Instructions for assembly

The product must be used according to the enclosed instructions.

Cleaning and care

• Clean the drinker body and bottle with warm water and a mild detergent before first and after each use.
• The cotton pad should be replaced regularly to ensure hygiene.
• Do not use harsh chemicals or abrasive sponges to avoid damaging the material.

Disposal

• The PLA drinking trough body is biodegradable but should be disposed of according to local regulations.
• The PETG bottle and cotton pad should be disposed of according to local regulations. The magnets are embedded inside and cannot be easily removed; therefore, if the product is no longer usable, dispose of it as a unit.

Flammability warning

This product contains flammable materials. Keep away from open flames and high temperatures to avoid deformation or the risk of fire. Burning PLA, PETG, and the magnetic materials can release harmful fumes such as carbon monoxide (CO) and carbon dioxide (CO2). In the event of a fire, ensure adequate ventilation and avoid inhaling these fumes.

Recommended target group

This product is designed for insects and their species-appropriate husbandry or care. It is not suitable for use with other animal species.

Possible dangers

• Swallowing small parts : Small children or animals may swallow parts of the product such as magnets, screw caps or the cotton pad, which may pose serious health risks.
• Danger of crushing due to magnets : When handling the magnets there is a risk of injury if skin or fingers become trapped.
• Material damage due to heat : The product should not be exposed to temperatures above 40°C, as PLA becomes deformable even at low temperatures.

Affected products

• TL_ITBKM
• TL_ITBK
• TL_ITBKXL

Use these articles to answer questions that customers have about your products and services. You can use text, links and images and also group articles into categories.