Digital thermo-hygrometer including BFC SYS holder – the perfect measuring solution for the BioFaunaCube if you want to keep a clear view of temperature and humidity . You get a compact LCD measuring device plus the matching BFC SYS holder , which is inserted directly into the posts of the BioFaunaCube – front or back, directly behind the glass . This ensures the device sits securely in the setup, allowing you to quickly read the values without having to improvise with suction cups, tape, or loose accessories.
Why this makes sense in the BioFaunaCube:
– Fixed position in the setup : no tipping over, no slipping, no improvised fastening
– Neatly integrated : sits directly on the post and stays out of the work zone
– Flexible positioning : front or back – depending on where you want to read it better.
– Better feel for your climate : helps you to specifically check temperature and humidity ranges in the setup instead of just working by feel.
Assembly:
1) Click the thermo-hygrometer into the holder.
2) Select position (front or back).
3) Insert the holder into the post – done.
Technical data:
– Temperature range: -50 °C to +70 °C
– Temperature accuracy: ±1.0 °C
– Humidity range: 1% RH to 99% RH
– Humidity accuracy: ±3 %RH
– Update: Measurement values approximately every 10 seconds
– Display: LCD (temperature and humidity at a glance)
Practical tip: Do not place the device directly in the spray mist or on wet substrate. This will give you more stable and comparable readings.
Scope of delivery:
– 1× digital thermo/hygrometer
– 1× BFC SYS holder
Note regarding 3D printing:
The BFC SYS holder is manufactured using 3D printing . Minor imperfections or irregularities may occur due to the production process. These do not affect the function or stability and do not constitute a defect.
Does the holder fit in every BioFaunaCube? +
Yes. The BFC SYS holder is designed to be inserted directly into the posts of the BioFaunaCube . This ensures the device sits securely in the cube without any additional adhesive.
Where is the most sensible place to measure? +
For meaningful readings, the device should not be placed directly in the spray stream, on wet substrate, or directly above a very damp corner. Depending on the setup, it may be useful to test at both the front and back.
Can I remove or replace the thermo-hygrometer later ?
Yes. You can remove the device from the holder and click it back in at any time, for example to change the battery or when moving to a different setup.
What is the advantage over a separate thermo-hygrometer? +
The major advantage is the clean integration into the BioFaunaCube . The device has a fixed place in the setup, remains easily readable, and does not need to be attached with suction cups or adhesive tape.
Note on 3D printing +
The BFC SYS holder is manufactured using 3D printing. Minor imperfections or irregularities may occur due to the production process. These do not affect the function or stability and do not constitute a defect.
